dmesg
[ 0.000000] Linux version 5.2.9-arch1-1-ARCH (builduser@ heftig-119803) (gcc version 9.1.0 (GCC)) # 1 SMP PREEMPT Fri Aug 16 11:29:43 UTC 2019
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b29e505a-dcaa-466d-9129-1a601f6b3db6
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7edffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c7ee0000-0x00000000c7ee2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c7ee3000-0x00000000c7eeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000c7ef0000-0x00000000c7efffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001b7ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-MA69VM-S2/GA-MA69VM-S2, BIOS F6 10/08/2007
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2605.813 MHz processor
[ 0.003492] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.003494] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.012352] AGP: No AGP bridge found
[ 0.012434] last_pfn = 0x1b8000 max_arch_pfn = 0x400000000
[ 0.012439] MTRR default type: uncachable
[ 0.012440] MTRR fixed ranges enabled:
[ 0.012442] 00000-9FFFF write-back
[ 0.012443] A0000-BFFFF uncachable
[ 0.012444] C0000-C7FFF write-protect
[ 0.012445] C8000-FFFFF uncachable
[ 0.012446] MTRR variable ranges enabled:
[ 0.012448] 0 base 0000000000 mask FF80000000 write-back
[ 0.012450] 1 base 0080000000 mask FFC0000000 write-back
[ 0.012451] 2 base 00C0000000 mask FFF8000000 write-back
[ 0.012453] 3 base 00C7F00000 mask FFFFF00000 uncachable
[ 0.012454] 4 base 0100000000 mask FF80000000 write-back
[ 0.012455] 5 base 0180000000 mask FFE0000000 write-back
[ 0.012457] 6 base 01A0000000 mask FFF0000000 write-back
[ 0.012458] 7 base 01B0000000 mask FFF8000000 write-back
[ 0.012459] TOM2: 00000001b8000000 aka 7040M
[ 0.012755] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.012833] total RAM covered: 3199M
[ 0.013539] Found optimal setting for mtrr clean up
[ 0.013541] gran_size: 64K chunk_size: 2M num_reg: 4 lose cover RAM: 0G
[ 0.013709] e820: update [mem 0xc7f00000-0xffffffff] usable ==> reserved
[ 0.013716] last_pfn = 0xc7ee0 max_arch_pfn = 0x400000000
[ 0.016059] found SMP MP-table at [mem 0x000f4fc0-0x000f4fcf]
[ 0.028290] check: Scanning 1 areas for low memory corruption
[ 0.028297] BRK [0x1a4e01000, 0x1a4e01fff] PGTABLE
[ 0.028301] BRK [0x1a4e02000, 0x1a4e02fff] PGTABLE
[ 0.028302] BRK [0x1a4e03000, 0x1a4e03fff] PGTABLE
[ 0.028344] BRK [0x1a4e04000, 0x1a4e04fff] PGTABLE
[ 0.028346] BRK [0x1a4e05000, 0x1a4e05fff] PGTABLE
[ 0.028501] BRK [0x1a4e06000, 0x1a4e06fff] PGTABLE
[ 0.028522] BRK [0x1a4e07000, 0x1a4e07fff] PGTABLE
[ 0.028543] BRK [0x1a4e08000, 0x1a4e08fff] PGTABLE
[ 0.028605] BRK [0x1a4e09000, 0x1a4e09fff] PGTABLE
[ 0.028692] BRK [0x1a4e0a000, 0x1a4e0afff] PGTABLE
[ 0.028713] BRK [0x1a4e0b000, 0x1a4e0bfff] PGTABLE
[ 0.028758] RAMDISK: [mem 0x375a9000-0x37acbfff]
[ 0.028766] ACPI: Early table checksum verification disabled
[ 0.029189] ACPI: RSDP 0x00000000000F6970 000014 (v00 GBT )
[ 0.029193] ACPI: RSDT 0x00000000C7EE3000 000038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.029200] ACPI: FACP 0x00000000C7EE3040 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.029207] ACPI: DSDT 0x00000000C7EE30C0 0047F7 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.029210] ACPI: FACS 0x00000000C7EE0000 000040
[ 0.029213] ACPI: SSDT 0x00000000C7EE7940 00028A (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.029217] ACPI: HPET 0x00000000C7EE7C00 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.029221] ACPI: MCFG 0x00000000C7EE7C40 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.029224] ACPI: APIC 0x00000000C7EE78C0 000068 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.029236] ACPI: Local APIC address 0xfee00000
[ 0.029347] Scanning NUMA topology in Northbridge 24
[ 0.029386] No NUMA configuration found
[ 0.029387] Faking a node at [mem 0x0000000000000000-0x00000001b7ffffff]
[ 0.029391] NODE_DATA(0) allocated [mem 0x1b7ffc000-0x1b7ffffff]
[ 0.029435] Zone ranges:
[ 0.029436] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.029437] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.029438] Normal [mem 0x0000000100000000-0x00000001b7ffffff]
[ 0.029439] Device empty
[ 0.029440] Movable zone start for each node
[ 0.029441] Early memory node ranges
[ 0.029442] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.029443] node 0: [mem 0x0000000000100000-0x00000000c7edffff]
[ 0.029444] node 0: [mem 0x0000000100000000-0x00000001b7ffffff]
[ 0.029458] Zeroed struct page in unavailable ranges: 386 pages
[ 0.029459] Initmem setup node 0 [mem 0x0000000000001000-0x00000001b7ffffff]
[ 0.029461] On node 0 totalpages: 1572478
[ 0.029463] DMA zone: 64 pages used for memmap
[ 0.029463] DMA zone: 21 pages reserved
[ 0.029464] DMA zone: 3998 pages, LIFO batch:0
[ 0.029585] DMA32 zone: 12732 pages used for memmap
[ 0.029586] DMA32 zone: 814816 pages, LIFO batch:63
[ 0.069664] Normal zone: 11776 pages used for memmap
[ 0.069665] Normal zone: 753664 pages, LIFO batch:63
[ 0.105960] Detected use of extended apic ids on hypertransport bus
[ 0.105978] ACPI: PM-Timer IO Port: 0x4008
[ 0.105980] ACPI: Local APIC address 0xfee00000
[ 0.105988] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.105989] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.106004] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.106007] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.106009] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.106011] ACPI: IRQ0 used by override.
[ 0.106012] ACPI: IRQ9 used by override.
[ 0.106014] Using ACPI (MADT) for SMP configuration information
[ 0.106016] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.106022] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.106040] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.106042] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.106043] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.106043] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.106045] PM: Registered nosave memory: [mem 0xc7ee0000-0xc7ee2fff]
[ 0.106046] PM: Registered nosave memory: [mem 0xc7ee3000-0xc7eeffff]
[ 0.106047] PM: Registered nosave memory: [mem 0xc7ef0000-0xc7efffff]
[ 0.106048] PM: Registered nosave memory: [mem 0xc7f00000-0xdfffffff]
[ 0.106049] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.106050] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.106050] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[ 0.106053] [mem 0xc7f00000-0xdfffffff] available for PCI devices
[ 0.106054] Booting paravirtualized kernel on bare hardware
[ 0.106059] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.262811] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:2 nr_node_ids:1
[ 0.264610] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u1048576
[ 0.264619] pcpu-alloc: s184320 r8192 d28672 u1048576 alloc=1*2097152
[ 0.264620] pcpu-alloc: [0] 0 1
[ 0.264645] Built 1 zonelists, mobility grouping on. Total pages: 1547885
[ 0.264646] Policy zone: Normal
[ 0.264650] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b29e505a-dcaa-466d-9129-1a601f6b3db6
[ 0.304772] AGP: Checking aperture...
[ 0.313625] AGP: No AGP bridge found
[ 0.313628] AGP: Node 0: aperture [bus addr 0xbc000000-0xbdffffff] (32MB)
[ 0.313629] Aperture pointing to e820 RAM. Ignoring.
[ 0.313630] AGP: Your BIOS doesn't leave an aperture memory hole
[ 0.313631] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.313632] AGP: This costs you 64MB of RAM
[ 0.313635] AGP: Mapping aperture over RAM [mem 0xbc000000-0xbfffffff] (65536KB)
[ 0.313638] PM: Registered nosave memory: [mem 0xbc000000-0xbfffffff]
[ 0.375346] Memory: 6025548K/6289912K available (12291K kernel code, 1319K rwdata, 3900K rodata, 1612K init, 3616K bss, 264364K reserved, 0K cma-reserved)
[ 0.375357] random: get_random_u64 called from __kmem_cache_create+0x44/0x4c0 with crng_init=0
[ 0.375590] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.375614] ftrace: allocating 37366 entries in 146 pages
[ 0.394278] rcu: Preemptible hierarchical RCU implementation.
[ 0.394280] rcu: CONFIG_RCU_FANOUT set to non-default value of 32.
[ 0.394280] rcu: RCU dyntick-idle grace-period acceleration is enabled.
[ 0.394281] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=2.
[ 0.394282] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.394284] Tasks RCU enabled.
[ 0.394285] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.394286] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.397150] NR_IRQS: 20736, nr_irqs: 440, preallocated irqs: 16
[ 0.397451] rcu: Offload RCU callbacks from CPUs: (none).
[ 0.397536] spurious 8259A interrupt: IRQ7.
[ 0.404470] Console: colour VGA+ 80x25
[ 0.404479] printk: console [tty0] enabled
[ 0.404521] ACPI: Core revision 20190509
[ 0.404720] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.404743] hpet clockevent registered
[ 0.404750] APIC: Switch to symmetric I/O mode setup
[ 0.405430] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.421415] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.421421] Calibrating delay loop (skipped), value calculated using timer frequency.. 5213.77 BogoMIPS (lpj=8686043)
[ 0.421424] pid_max: default: 32768 minimum: 301
[ 0.421474] LSM: Security Framework initializing
[ 0.421481] Yama: becoming mindful.
[ 0.426384] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.428862] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.428975] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.429061] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.429305] *** VALIDATE proc ***
[ 0.429396] *** VALIDATE cgroup1 ***
[ 0.429398] *** VALIDATE cgroup2 ***
[ 0.429473] LVT offset 0 assigned for vector 0xf9
[ 0.429476] process: using AMD E400 aware idle routine
[ 0.429478] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.429479] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[ 0.429481] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.429482] Spectre V2 : Spectre mitigation: LFENCE not serializing, switching to generic retpoline
[ 0.429572] Spectre V2 : Mitigation: Full generic retpoline
[ 0.429572] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.429727] Freeing SMP alternatives memory: 32K
[ 0.434750] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ (family: 0xf, model: 0x6b, stepping: 0x2)
[ 0.451429] Performance Events: AMD PMU driver.
[ 0.451434] ... version: 0
[ 0.451435] ... bit width: 48
[ 0.451436] ... generic registers: 4
[ 0.451437] ... value mask: 0000ffffffffffff
[ 0.451438] ... max period: 00007fffffffffff
[ 0.451438] ... fixed-purpose events: 0
[ 0.451439] ... event mask: 000000000000000f
[ 0.458088] rcu: Hierarchical SRCU implementation.
[ 0.481440] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.488099] smp: Bringing up secondary CPUs ...
[ 0.528119] x86: Booting SMP configuration:
[ 0.528121] .... node # 0, CPUs: # 1
[ 0.010612] do_IRQ: 1.55 No irq handler for vector
[ 0.611537] smp: Brought up 1 node, 2 CPUs
[ 0.611537] smpboot: Max logical packages: 1
[ 0.611537] smpboot: Total of 2 processors activated (10427.75 BogoMIPS)
[ 0.612427] devtmpfs: initialized
[ 0.612427] x86/mm: Memory block size: 128MB
[ 0.612463] PM: Registering ACPI NVS region [mem 0xc7ee0000-0xc7ee2fff] (12288 bytes)
[ 0.612463] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.612463] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.612463] pinctrl core: initialized pinctrl subsystem
[ 0.612463] PM: RTC time: 13:10:44, date: 2019-08-28
[ 0.612463] NET: Registered protocol family 16
[ 0.612463] audit: initializing netlink subsys (disabled)
[ 0.614779] audit: type=2000 audit(1566997844.206:1): state=initialized audit_enabled=0 res=1
[ 0.614843] cpuidle: using governor ladder
[ 0.614843] cpuidle: using governor menu
[ 0.614843] node 0 link 0: io port [c000, ffff]
[ 0.614843] TOM: 00000000c8000000 aka 3200M
[ 0.614843] node 0 link 0: mmio [a0000, bffff]
[ 0.614843] node 0 link 0: mmio [c8000000, fe02ffff]
[ 0.614843] node 0 link 0: mmio [e0000000, efffffff]
[ 0.614843] TOM2: 00000001b8000000 aka 7040M
[ 0.614843] bus: [bus 00-03] on node 0 link 0
[ 0.614843] bus: 00 [io 0x0000-0xffff]
[ 0.614843] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.614843] bus: 00 [mem 0xc8000000-0xffffffff]
[ 0.614843] bus: 00 [mem 0x1b8000000-0xfcffffffff]
[ 0.614864] ACPI: bus type PCI registered
[ 0.614867] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.614990] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.614995] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.615015] PCI: Using configuration type 1 for base access
[ 0.616812] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.621616] ACPI: Added _OSI(Module Device)
[ 0.621617] ACPI: Added _OSI(Processor Device)
[ 0.621618] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.621619] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.621621] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.621622] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.621623] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.628401] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.628682] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190509/dspkginit-438)
[ 0.628784] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190509/dspkginit-438)
[ 0.628880] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190509/dspkginit-438)
[ 0.628976] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190509/dspkginit-438)
[ 0.629081] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190509/dspkginit-438)
[ 0.629178] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190509/dspkginit-438)
[ 0.629274] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190509/dspkginit-438)
[ 0.629369] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190509/dspkginit-438)
[ 0.629475] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190509/dspkginit-438)
[ 0.629571] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190509/dspkginit-438)
[ 0.629666] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190509/dspkginit-438)
[ 0.629857] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190509/dspkginit-438)
[ 0.630150] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190509/dspkginit-438)
[ 0.630434] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190509/dspkginit-438)
[ 0.630717] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190509/dspkginit-438)
[ 0.631000] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190509/dspkginit-438)
[ 0.631293] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190509/dspkginit-438)
[ 0.631470] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190509/dspkginit-438)
[ 0.631754] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190509/dspkginit-438)
[ 0.632037] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190509/dspkginit-438)
[ 0.632331] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190509/dspkginit-438)
[ 0.632614] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190509/dspkginit-438)
[ 0.632897] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190509/dspkginit-438)
[ 0.633181] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190509/dspkginit-438)
[ 0.633491] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKA (20190509/dspkginit-438)
[ 0.633792] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKB (20190509/dspkginit-438)
[ 0.634092] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKC (20190509/dspkginit-438)
[ 0.634393] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - LNKD (20190509/dspkginit-438)
[ 0.637259] ACPI: Interpreter enabled
[ 0.637289] ACPI: (supports S0 S1 S4 S5)
[ 0.637291] ACPI: Using IOAPIC for interrupt routing
[ 0.637407] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.637665] ACPI: Enabled 6 GPEs in block 00 to 1F
[ 0.646249] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.646259] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.646742] PCI host bridge to bus 0000:00
[ 0.646745] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.646747] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.646748] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.646750] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.646752] pci_bus 0000:00: root bus resource [mem 0xc8000000-0xfebfffff window]
[ 0.646754] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.646762] pci 0000:00:00.0: [1002:7910] type 00 class 0x060000
[ 0.646920] pci 0000:00:02.0: [1002:7913] type 01 class 0x060400
[ 0.646942] pci 0000:00:02.0: enabling Extended Tags
[ 0.646970] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.647114] pci 0000:00:04.0: [1002:7914] type 01 class 0x060400
[ 0.647134] pci 0000:00:04.0: enabling Extended Tags
[ 0.647159] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.647317] pci 0000:00:12.0: [1002:4380] type 00 class 0x01018f
[ 0.647339] pci 0000:00:12.0: reg 0x10: [io 0xff00-0xff07]
[ 0.647348] pci 0000:00:12.0: reg 0x14: [io 0xfe00-0xfe03]
[ 0.647358] pci 0000:00:12.0: reg 0x18: [io 0xfd00-0xfd07]
[ 0.647368] pci 0000:00:12.0: reg 0x1c: [io 0xfc00-0xfc03]
[ 0.647378] pci 0000:00:12.0: reg 0x20: [io 0xfb00-0xfb0f]
[ 0.647388] pci 0000:00:12.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.647413] pci 0000:00:12.0: set SATA to AHCI mode
[ 0.647565] pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310
[ 0.647584] pci 0000:00:13.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
[ 0.647773] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310
[ 0.647792] pci 0000:00:13.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
[ 0.647982] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310
[ 0.648001] pci 0000:00:13.2: reg 0x10: [mem 0xfe02c000-0xfe02cfff]
[ 0.648213] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310
[ 0.648232] pci 0000:00:13.3: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
[ 0.648421] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310
[ 0.648440] pci 0000:00:13.4: reg 0x10: [mem 0xfe02a000-0xfe02afff]
[ 0.648633] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320
[ 0.648655] pci 0000:00:13.5: reg 0x10: [mem 0xfe029000-0xfe0290ff]
[ 0.648741] pci 0000:00:13.5: supports D1 D2
[ 0.648742] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.648886] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.648913] pci 0000:00:14.0: reg 0x10: [io 0x0b00-0x0b0f]
[ 0.649115] pci 0000:00:14.1: [1002:438c] type 00 class 0x01018a
[ 0.649134] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
[ 0.649143] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
[ 0.649153] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
[ 0.649163] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.649173] pci 0000:00:14.1: reg 0x20: [io 0xf900-0xf90f]
[ 0.649193] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.649195] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.649196] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.649198] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.649332] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.649358] pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit]
[ 0.649430] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.649566] pci 0000:00:14.3: [1002:438d] type 00 class 0x060100
[ 0.649764] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.649947] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.650071] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.650190] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.650311] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.650489] pci 0000:01:00.0: [10de:1040] type 00 class 0x030000
[ 0.650508] pci 0000:01:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
[ 0.650518] pci 0000:01:00.0: reg 0x14: [mem 0xc8000000-0xcfffffff 64bit pref]
[ 0.650528] pci 0000:01:00.0: reg 0x1c: [mem 0xd6000000-0xd7ffffff 64bit pref]
[ 0.650535] pci 0000:01:00.0: reg 0x24: [io 0xdf00-0xdf7f]
[ 0.650542] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 0.650549] pci 0000:01:00.0: enabling Extended Tags
[ 0.650667] pci 0000:01:00.1: [10de:0e08] type 00 class 0x040300
[ 0.650683] pci 0000:01:00.1: reg 0x10: [mem 0xfcffc000-0xfcffffff]
[ 0.650720] pci 0000:01:00.1: enabling Extended Tags
[ 0.658109] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.658112] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.658115] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff]
[ 0.658118] pci 0000:00:02.0: bridge window [mem 0xc8000000-0xd7ffffff 64bit pref]
[ 0.658168] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.658190] pci 0000:02:00.0: reg 0x10: [io 0xee00-0xeeff]
[ 0.658210] pci 0000:02:00.0: reg 0x18: [mem 0xfdeff000-0xfdefffff 64bit pref]
[ 0.658224] pci 0000:02:00.0: reg 0x20: [mem 0xfdef8000-0xfdefbfff 64bit pref]
[ 0.658302] pci 0000:02:00.0: supports D1 D2
[ 0.658304] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.658414] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.658417] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
[ 0.658420] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.658423] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.658436] pci_bus 0000:03: extended config space not accessible
[ 0.658490] pci 0000:03:0f.0: [10ec:8167] type 00 class 0x020000
[ 0.658512] pci 0000:03:0f.0: reg 0x10: [io 0xce00-0xceff]
[ 0.658524] pci 0000:03:0f.0: reg 0x14: [mem 0xfddff000-0xfddff0ff]
[ 0.658578] pci 0000:03:0f.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.658619] pci 0000:03:0f.0: supports D1 D2
[ 0.658620] pci 0000:03:0f.0: PME# supported from D1 D2 D3hot D3cold
[ 0.658703] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[ 0.658707] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.658711] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.658715] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
[ 0.658718] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.658720] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.658721] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.658723] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.658725] pci 0000:00:14.4: bridge window [mem 0xc8000000-0xfebfffff window] (subtractive decode)
[ 0.659045] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.659141] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.659235] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.659329] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.659423] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.659517] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.659611] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.659705] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.660849] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.660849] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.660849] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.660849] vgaarb: loaded
[ 0.660849] ACPI: bus type USB registered
[ 0.660849] usbcore: registered new interface driver usbfs
[ 0.660849] usbcore: registered new interface driver hub
[ 0.660849] usbcore: registered new device driver usb
[ 0.660849] pps_core: LinuxPPS API ver. 1 registered
[ 0.660849] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@ linux.it>
[ 0.660849] PTP clock support registered
[ 0.660849] EDAC MC: Ver: 3.0.0
[ 0.664800] PCI: Using ACPI for IRQ routing
[ 0.674164] PCI: pci_cache_line_size set to 64 bytes
[ 0.674230] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.674232] e820: reserve RAM buffer [mem 0xc7ee0000-0xc7ffffff]
[ 0.674405] NetLabel: Initializing
[ 0.674406] NetLabel: domain hash size = 128
[ 0.674407] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.674427] NetLabel: unlabeled traffic allowed by default
[ 0.674435] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.674435] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.675853] clocksource: Switched to clocksource hpet
[ 0.697152] VFS: Disk quotas dquot_6.6.0
[ 0.697177] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.697218] *** VALIDATE hugetlbfs ***
[ 0.697282] pnp: PnP ACPI init
[ 0.697478] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.697480] system 00:00: [io 0x0220-0x0225] has been reserved
[ 0.697482] system 00:00: [io 0x0290-0x0294] has been reserved
[ 0.697490] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.697849] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
[ 0.697855] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:0f.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.697889] system 00:01: [io 0x4100-0x411f] has been reserved
[ 0.697891] system 00:01: [io 0x0228-0x022f] has been reserved
[ 0.697892] system 00:01: [io 0x040b] has been reserved
[ 0.697894] system 00:01: [io 0x04d6] has been reserved
[ 0.697896] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.697898] system 00:01: [io 0x0c14] has been reserved
[ 0.697900] system 00:01: [io 0x0c50-0x0c52] has been reserved
[ 0.697902] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
[ 0.697904] system 00:01: [io 0x0c6f] has been reserved
[ 0.697906] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.697908] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.697909] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
[ 0.697911] system 00:01: [io 0x4000-0x40fe] has been reserved
[ 0.697913] system 00:01: [io 0x4210-0x4217] has been reserved
[ 0.697915] system 00:01: [io 0x0b00-0x0b1f] could not be reserved
[ 0.697917] system 00:01: [io 0x0238-0x023f] has been reserved
[ 0.697920] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.697925] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.698216] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.698702] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.699061] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.699435] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.699621] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.699718] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.699724] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.700037] system 00:08: [mem 0x000cde00-0x000cffff] has been reserved
[ 0.700040] system 00:08: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.700042] system 00:08: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.700044] system 00:08: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.700046] system 00:08: [mem 0xc7ee0000-0xc7efffff] could not be reserved
[ 0.700047] system 00:08: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.700050] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.700051] system 00:08: [mem 0x00100000-0xc7edffff] could not be reserved
[ 0.700054] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.700056] system 00:08: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.700057] system 00:08: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.700063] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.700091] pnp: PnP ACPI: found 9 devices
[ 0.707694] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.707726] pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc07ffff pref]
[ 0.707729] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.707732] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.707736] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff]
[ 0.707738] pci 0000:00:02.0: bridge window [mem 0xc8000000-0xd7ffffff 64bit pref]
[ 0.707741] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.707743] pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
[ 0.707746] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.707748] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.707754] pci 0000:03:0f.0: BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref]
[ 0.707756] pci 0000:00:14.4: PCI bridge to [bus 03]
[ 0.707758] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.707763] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.707767] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
[ 0.707776] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.707777] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.707779] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.707781] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.707782] pci_bus 0000:00: resource 8 [mem 0xc8000000-0xfebfffff window]
[ 0.707784] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.707786] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff]
[ 0.707787] pci_bus 0000:01: resource 2 [mem 0xc8000000-0xd7ffffff 64bit pref]
[ 0.707789] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.707791] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.707793] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.707795] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.707796] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.707798] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
[ 0.707799] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
[ 0.707801] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
[ 0.707802] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.707804] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.707805] pci_bus 0000:03: resource 8 [mem 0xc8000000-0xfebfffff window]
[ 0.707961] NET: Registered protocol family 2
[ 0.708211] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.708292] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.708670] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.709305] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.709439] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.709538] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.709706] NET: Registered protocol family 1
[ 0.709715] NET: Registered protocol family 44
[ 0.738355] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x63a took 27936 usecs
[ 0.764906] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x63a took 25914 usecs
[ 0.791564] pci 0000:00:13.2: quirk_usb_early_handoff+0x0/0x63a took 26024 usecs
[ 0.818230] pci 0000:00:13.3: quirk_usb_early_handoff+0x0/0x63a took 26032 usecs
[ 0.844896] pci 0000:00:13.4: quirk_usb_early_handoff+0x0/0x63a took 26032 usecs
[ 0.845201] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.845270] PCI: CLS 4 bytes, default 64
[ 0.845334] Trying to unpack rootfs image as initramfs...
[ 0.949921] Freeing initrd memory: 5260K
[ 0.949937] PCI-DMA: Disabling AGP.
[ 0.950022] PCI-DMA: aperture base @ bc000000 size 65536 KB
[ 0.950022] PCI-DMA: using GART IOMMU.
[ 0.950026] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.953628] check: Scanning for low memory corruption every 60 seconds
[ 0.954602] Initialise system trusted keyrings
[ 0.954617] Key type blacklist registered
[ 0.954736] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[ 0.957151] zbud: loaded
[ 0.960638] Key type asymmetric registered
[ 0.960641] Asymmetric key parser 'x509' registered
[ 0.960670] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.960776] io scheduler mq-deadline registered
[ 0.960778] io scheduler kyber registered
[ 0.960852] io scheduler bfq registered
[ 0.961458] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.961638] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.961652] ACPI: Power Button [PWRB]
[ 0.961741] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.961780] ACPI: Power Button [PWRF]
[ 0.962283] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.983048] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.003864] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 1.005173] usbcore: registered new interface driver usbserial_generic
[ 1.005181] usbserial: USB Serial support registered for generic
[ 1.005217] rtc_cmos 00:02: RTC can wake from S4
[ 1.005398] rtc_cmos 00:02: registered as rtc0
[ 1.005425] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.005540] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.005899] NET: Registered protocol family 10
[ 1.020833] Segment Routing with IPv6
[ 1.020871] NET: Registered protocol family 17
[ 1.021154] mce: Using 5 MCE banks
[ 1.021187] RAS: Correctable Errors collector initialized.
[ 1.021493] registered taskstats version 1
[ 1.021505] Loading compiled-in X.509 certificates
[ 1.029885] Loaded X.509 cert 'Build time autogenerated kernel key: 5a9fa50c8058f9b75a5c66bf71e288f343173c74'
[ 1.029931] zswap: loaded using pool lzo/zbud
[ 1.044367] Key type big_key registered
[ 1.044888] PM: Magic number: 15:112:181
[ 1.045020] rtc_cmos 00:02: setting system clock to 2019-08-28T13:10:44 UTC (1566997844)
[ 1.045186] Unstable clock detected, switching default tracing clock to "global"
If you want to keep using the local clock, then add:
"trace_clock=local"
on the kernel command line
[ 1.048066] Freeing unused decrypted memory: 2040K
[ 1.049288] Freeing unused kernel image memory: 1612K
[ 1.078135] Write protecting the kernel read-only data: 18432k
[ 1.079629] Freeing unused kernel image memory: 2012K
[ 1.079792] Freeing unused kernel image memory: 196K
[ 1.094270] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.094281] Run /init as init process
[ 1.108394] udevd[170]: starting version 3.2.7
[ 1.108658] random: udevd: uninitialized urandom read (16 bytes read)
[ 1.108699] random: udevd: uninitialized urandom read (16 bytes read)
[ 1.109731] udevd[171]: starting eudev-3.2.7
[ 1.119167] random: udevd: uninitialized urandom read (16 bytes read)
[ 1.153751] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.153754] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.153983] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.162128] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.164951] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.165120] SCSI subsystem initialized
[ 1.166491] ehci-pci: EHCI PCI platform driver
[ 1.166856] ehci-pci 0000:00:13.5: EHCI Host Controller
[ 1.166870] ehci-pci 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 1.166882] ehci-pci 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 1.166895] ehci-pci 0000:00:13.5: debug port 1
[ 1.166972] ehci-pci 0000:00:13.5: irq 19, io mem 0xfe029000
[ 1.178125] ehci-pci 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 1.178265] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[ 1.178267] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.178268] usb usb1: Product: EHCI Host Controller
[ 1.178270] usb usb1: Manufacturer: Linux 5.2.9-arch1-1-ARCH ehci_hcd
[ 1.178271] usb usb1: SerialNumber: 0000:00:13.5
[ 1.178486] hub 1-0:1.0: USB hub found
[ 1.178497] hub 1-0:1.0: 10 ports detected
[ 1.203832] ohci-pci: OHCI PCI platform driver
[ 1.204102] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.204110] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 1.204176] ohci-pci 0000:00:13.0: irq 16, io mem 0xfe02e000
[ 1.211533] libata version 3.00 loaded.
[ 1.218935] scsi host0: pata_atiixp
[ 1.219338] scsi host1: pata_atiixp
[ 1.219421] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 1.219423] ata2: DUMMY
[ 1.219437] ahci 0000:00:12.0: version 3.0
[ 1.219647] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 1.219756] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.219758] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.222825] scsi host2: ahci
[ 1.224849] scsi host3: ahci
[ 1.225207] scsi host4: ahci
[ 1.225490] scsi host5: ahci
[ 1.225661] ata3: SATA max UDMA/133 abar m1024@ 0xfe02f000 port 0xfe02f100 irq 22
[ 1.225665] ata4: SATA max UDMA/133 abar m1024@ 0xfe02f000 port 0xfe02f180 irq 22
[ 1.225668] ata5: SATA max UDMA/133 abar m1024@ 0xfe02f000 port 0xfe02f200 irq 22
[ 1.225670] ata6: SATA max UDMA/133 abar m1024@ 0xfe02f000 port 0xfe02f280 irq 22
[ 1.232015] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.262206] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02
[ 1.262208] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.262210] usb usb2: Product: OHCI PCI host controller
[ 1.262212] usb usb2: Manufacturer: Linux 5.2.9-arch1-1-ARCH ohci_hcd
[ 1.262213] usb usb2: SerialNumber: 0000:00:13.0
[ 1.262466] hub 2-0:1.0: USB hub found
[ 1.262479] hub 2-0:1.0: 2 ports detected
[ 1.262859] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 1.262867] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 1.262927] ohci-pci 0000:00:13.1: irq 17, io mem 0xfe02d000
[ 1.322183] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02
[ 1.322185] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.322187] usb usb3: Product: OHCI PCI host controller
[ 1.322188] usb usb3: Manufacturer: Linux 5.2.9-arch1-1-ARCH ohci_hcd
[ 1.322190] usb usb3: SerialNumber: 0000:00:13.1
[ 1.322348] hub 3-0:1.0: USB hub found
[ 1.322361] hub 3-0:1.0: 2 ports detected
[ 1.322685] ohci-pci 0000:00:13.2: OHCI PCI host controller
[ 1.322692] ohci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.322745] ohci-pci 0000:00:13.2: irq 18, io mem 0xfe02c000
[ 1.377584] ata1.00: ATAPI: HL-DT-ST CD-RW GCE-8240B, 1.06, max MWDMA2
[ 1.382198] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02
[ 1.382200] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.382202] usb usb4: Product: OHCI PCI host controller
[ 1.382203] usb usb4: Manufacturer: Linux 5.2.9-arch1-1-ARCH ohci_hcd
[ 1.382204] usb usb4: SerialNumber: 0000:00:13.2
[ 1.382376] hub 4-0:1.0: USB hub found
[ 1.382389] hub 4-0:1.0: 2 ports detected
[ 1.382705] ohci-pci 0000:00:13.3: OHCI PCI host controller
[ 1.382712] ohci-pci 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 1.382741] ohci-pci 0000:00:13.3: irq 17, io mem 0xfe02b000
[ 1.384354] scsi 0:0:0:0: CD-ROM HL-DT-ST CD-RW GCE-8240B 1.06 PQ: 0 ANSI: 5
[ 1.427192] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/40x writer cd/rw xa/form2 cdda tray
[ 1.427197] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.427667] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.442220] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02
[ 1.442223] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.442225] usb usb5: Product: OHCI PCI host controller
[ 1.442227] usb usb5: Manufacturer: Linux 5.2.9-arch1-1-ARCH ohci_hcd
[ 1.442228] usb usb5: SerialNumber: 0000:00:13.3
[ 1.442431] hub 5-0:1.0: USB hub found
[ 1.442444] hub 5-0:1.0: 2 ports detected
[ 1.442824] ohci-pci 0000:00:13.4: OHCI PCI host controller
[ 1.442832] ohci-pci 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 1.442872] ohci-pci 0000:00:13.4: irq 18, io mem 0xfe02a000
[ 1.502184] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02
[ 1.502186] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.502187] usb usb6: Product: OHCI PCI host controller
[ 1.502189] usb usb6: Manufacturer: Linux 5.2.9-arch1-1-ARCH ohci_hcd
[ 1.502190] usb usb6: SerialNumber: 0000:00:13.4
[ 1.502380] hub 6-0:1.0: USB hub found
[ 1.502392] hub 6-0:1.0: 2 ports detected
[ 1.544493] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.698108] ata3: softreset failed (device not ready)
[ 1.698286] ata3: applying PMP SRST workaround and retrying
[ 1.704774] ata5: softreset failed (device not ready)
[ 1.704953] ata5: applying PMP SRST workaround and retrying
[ 1.704986] ata6: softreset failed (device not ready)
[ 1.705165] ata6: applying PMP SRST workaround and retrying
[ 1.721439] usb 2-2: new low-speed USB device number 2 using ohci-pci
[ 1.861448] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.861477] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.862351] ata5.00: HPA detected: current 1953523055, native 1953525168
[ 1.862386] ata6.00: HPA detected: current 1953523055, native 1953525168
[ 1.862553] ata5.00: ATA-8: Hitachi HDT721010SLA360, ST6OA31B, max UDMA/133
[ 1.862555] ata5.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.862558] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 1.862618] ata6.00: ATA-8: Hitachi HDT721010SLA360, ST6OA31B, max UDMA/133
[ 1.862620] ata6.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.862623] ata6.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 1.863834] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 1.863836] ata5.00: configured for UDMA/133
[ 1.863907] ata6.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 1.863909] ata6.00: configured for UDMA/133
[ 1.908150] usb 2-2: New USB device found, idVendor=046d, idProduct=c024, bcdDevice=98.02
[ 1.908152] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.908154] usb 2-2: Product: USB-PS/2 Optical Mouse
[ 1.908155] usb 2-2: Manufacturer: B16_b_02
[ 1.911467] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.915943] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.924503] usbcore: registered new interface driver usbhid
[ 1.924506] usbhid: USB HID core driver
[ 1.927298] input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/0003:046D:C024.0001/input/input3
[ 1.927388] hid-generic 0003:046D:C024.0001: input,hidraw0: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:13.0-2/input0
[ 2.541440] usb 3-1: new full-speed USB device number 2 using ohci-pci
[ 2.754134] usb 3-1: New USB device found, idVendor=03f0, idProduct=1604, bcdDevice= 1.00
[ 2.754136] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.754138] usb 3-1: Product: DeskJet 940C
[ 2.754139] usb 3-1: Manufacturer: Hewlett-Packard
[ 2.754141] usb 3-1: SerialNumber: CN15U6C0J7BH
[ 3.154773] usb 1-10: new high-speed USB device number 4 using ehci-pci
[ 3.317407] usb 1-10: New USB device found, idVendor=0df6, idProduct=0078, bcdDevice= 1.01
[ 3.317409] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.317411] usb 1-10: Product: 802.11 n WLAN
[ 3.317412] usb 1-10: Manufacturer: Ralink
[ 3.317413] usb 1-10: SerialNumber: 1.0
[ 7.071448] ata3.00: qc timeout (cmd 0x47)
[ 7.071461] ata3.00: READ LOG DMA EXT failed, trying PIO
[ 7.071463] ata3.00: NCQ Send/Recv Log not supported
[ 7.071465] ata3.00: ATA-10: ADATA SP580, 1.0.0.5, max UDMA/133
[ 7.071467] ata3.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 7.071468] ata3.00: failed to get Identify Device Data, Emask 0x40
[ 7.071474] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 7.071478] ata3.00: failed to set xfermode (err_mask=0x40)
[ 7.541436] ata3: softreset failed (device not ready)
[ 7.541609] ata3: applying PMP SRST workaround and retrying
[ 7.754780] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7.784642] ata3.00: NCQ Send/Recv Log not supported
[ 7.784795] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 7.800041] ata3.00: NCQ Send/Recv Log not supported
[ 7.800191] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 7.800193] ata3.00: configured for UDMA/133
[ 7.800625] scsi 2:0:0:0: Direct-Access ATA ADATA SP580 0.5 PQ: 0 ANSI: 5
[ 7.802003] scsi 4:0:0:0: Direct-Access ATA Hitachi HDT72101 A31B PQ: 0 ANSI: 5
[ 7.803322] scsi 5:0:0:0: Direct-Access ATA Hitachi HDT72101 A31B PQ: 0 ANSI: 5
[ 7.805843] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 7.805866] sd 2:0:0:0: [sda] Write Protect is off
[ 7.805868] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.805900] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.806903] sd 4:0:0:0: [sdb] 1953523055 512-byte logical blocks: (1.00 TB/932 GiB)
[ 7.806925] sd 4:0:0:0: [sdb] Write Protect is off
[ 7.806927] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 7.806963] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.807681] sd 5:0:0:0: [sdc] 1953523055 512-byte logical blocks: (1.00 TB/932 GiB)
[ 7.807701] sd 5:0:0:0: [sdc] Write Protect is off
[ 7.807703] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 7.807735] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.809581] sda: sda1 sda2 sda3 sda4 sda5
[ 7.810475] sd 2:0:0:0: [sda] Attached SCSI disk
[ 7.817483] sdc: sdc1
[ 7.818076] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 7.873399] random: fast init done
[ 7.900015] sdb: sdb1 sdb2 sdb4 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 >
[ 7.901228] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 8.851205] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 9.537300] random: crng init done
[ 10.010575] Non-volatile memory driver v1.3
[ 10.018676] fuse: init (API version 7.31)
[ 10.036354] tun: Universal TUN/TAP device driver, 1.6
[ 10.045604] loop: module loaded
[ 10.049273] PPP generic driver version 2.4.2
[ 10.061694] VFIO - User Level meta-driver version: 0.3
[ 10.074254] device-mapper: uevent: version 1.0.3
[ 10.078166] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@ redhat.com
[ 10.113177] raid6: sse2x4 gen() 4921 MB/s
[ 10.164811] NET: Registered protocol family 40
[ 10.168250] raid6: sse2x4 xor() 2321 MB/s
[ 10.204486] Bluetooth: Core ver 2.22
[ 10.204520] NET: Registered protocol family 31
[ 10.204521] Bluetooth: HCI device and connection manager initialized
[ 10.204529] Bluetooth: HCI socket layer initialized
[ 10.204532] Bluetooth: L2CAP socket layer initialized
[ 10.204536] Bluetooth: SCO socket layer initialized
[ 10.224799] raid6: sse2x2 gen() 3791 MB/s
[ 10.281439] raid6: sse2x2 xor() 3388 MB/s
[ 10.338106] raid6: sse2x1 gen() 3248 MB/s
[ 10.394774] raid6: sse2x1 xor() 3002 MB/s
[ 10.394775] raid6: using algorithm sse2x4 gen() 4921 MB/s
[ 10.394775] raid6: .... xor() 2321 MB/s, rmw enabled
[ 10.394777] raid6: using intx1 recovery algorithm
[ 10.397381] xor: measuring software checksum speed
[ 10.428092] prefetch64-sse: 8475.600 MB/sec
[ 10.461426] generic_sse: 8454.000 MB/sec
[ 10.461427] xor: using function: prefetch64-sse (8475.600 MB/sec)
[ 10.576230] Btrfs loaded, crc32c=crc32c-generic
[ 10.599774] udevd[484]: starting version 3.2.7
[ 10.635063] udevd[484]: starting eudev-3.2.7
[ 11.742209] IT8716 SuperIO detected.
[ 11.742576] parport_pc 00:05: reported by Plug and Play ACPI
[ 11.742660] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 11.824517] IPMI message handler: version 39.2
[ 11.827621] ipmi device interface
[ 11.834901] Linux agpgart interface v0.103
[ 11.879953] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 11.887455] libphy: r8169: probed
[ 11.887763] r8169 0000:02:00.0 eth0: RTL8168f/8111f, 54:a0:50:55:c8:f7, XID 480, IRQ 26
[ 11.887766] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 11.894028] libphy: r8169: probed
[ 11.894524] r8169 0000:03:0f.0 eth1: RTL8169sc/8110sc, 00:1a:4d:f8:5a:d2, XID 180, IRQ 23
[ 11.894527] r8169 0000:03:0f.0 eth1: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[ 11.917275] usblp 3-1:1.0: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x1604
[ 11.917328] usbcore: registered new interface driver usblp
[ 11.922305] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 11.922405] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb10
[ 11.927633] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 11.968562] mousedev: PS/2 mouse device common for all mice
[ 11.981684] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 11.981701] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 12.022942] snd_hda_codec_realtek hdaudioC0D3: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 12.022946] snd_hda_codec_realtek hdaudioC0D3: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.022948] snd_hda_codec_realtek hdaudioC0D3: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 12.022949] snd_hda_codec_realtek hdaudioC0D3: mono: mono_out=0x0
[ 12.022950] snd_hda_codec_realtek hdaudioC0D3: dig-out=0x1e/0x0
[ 12.022952] snd_hda_codec_realtek hdaudioC0D3: inputs:
[ 12.022954] snd_hda_codec_realtek hdaudioC0D3: Rear Mic=0x18
[ 12.022956] snd_hda_codec_realtek hdaudioC0D3: Front Mic=0x19
[ 12.022957] snd_hda_codec_realtek hdaudioC0D3: Line=0x1a
[ 12.022959] snd_hda_codec_realtek hdaudioC0D3: CD=0x1c
[ 12.022960] snd_hda_codec_realtek hdaudioC0D3: dig-in=0x1f
[ 12.066911] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[ 12.066990] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 12.067056] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 12.067124] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 12.067191] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 12.067257] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 12.067324] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 12.067392] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 12.102010] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 12.134139] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 12.452302] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
[ 12.452381] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
[ 12.464790] usb 1-10: reset high-speed USB device number 4 using ehci-pci
[ 12.620905] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected
[ 12.649917] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5372 detected
[ 12.677192] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 12.677672] usbcore: registered new interface driver rt2800usb
[ 12.783134] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum # 141
[ 12.783169] k8temp 0000:00:18.3: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 12.793158] nvidia: loading out-of-tree module taints kernel.
[ 12.793171] nvidia: module license 'NVIDIA' taints kernel.
[ 12.793172] Disabling lock debugging due to kernel taint
[ 12.816734] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 12.833900] nvidia-nvlink: Nvlink Core is being initialized, major device number 238
[ 12.834669] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 12.834991] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 390.116 Sun Jan 27 07:21:36 PST 2019 (using threaded interrupts)
[ 12.944843] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.116 Sun Jan 27 06:30:32 PST 2019
[ 12.949447] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 12.949451] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[ 12.958195] kvm: Nested Virtualization enabled
[ 12.962469] MCE: In-kernel MCE decoding enabled.
[ 12.969128] EDAC amd64: Node 0: DRAM ECC disabled.
[ 12.969131] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 12.998945] EDAC amd64: Node 0: DRAM ECC disabled.
[ 12.998948] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 13.002171] powernow_k8: fid 0x12 (2600 MHz), vid 0x8
[ 13.002174] powernow_k8: fid 0x10 (2400 MHz), vid 0xa
[ 13.002175] powernow_k8: fid 0xe (2200 MHz), vid 0xc
[ 13.002176] powernow_k8: fid 0xc (2000 MHz), vid 0xe
[ 13.002177] powernow_k8: fid 0xa (1800 MHz), vid 0x10
[ 13.002178] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
[ 13.003291] powernow_k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ (2 cpu cores) (version 2.20.00)
[ 13.048606] ppdev: user-space parallel port driver
[ 13.063865] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 13.074585] r8169 0000:03:0f.0 enp3s15: renamed from eth1
[ 13.183606] rt2800usb 1-10:1.0 wlp0s19f5u10: renamed from wlan0
[ 13.730223] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 13.743640] EXT4-fs (sda4): re-mounted. Opts:
[ 14.492871] RTL8211E Gigabit Ethernet r8169-200:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
[ 14.675905] r8169 0000:02:00.0 enp2s0: Link is Down
[ 14.687598] RTL8211B Gigabit Ethernet r8169-378:00: attached PHY driver [RTL8211B Gigabit Ethernet] (mii_bus:phy_addr=r8169-378:00, irq=IGNORE)
[ 14.755605] r8169 0000:03:0f.0 enp3s15: Link is Down
[ 14.764456] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 14.764953] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[ 14.887110] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window]
[ 14.887715] caller _nv001168rm+0xe3/0x1d0 [nvidia] mapping multiple BARs
[ 17.304071] r8169 0000:02:00.0 enp2s0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 17.304082] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 3425.196250] perf: interrupt took too long (2521 > 2500), lowering kernel.perf_event_max_sample_rate to 79200
[ 5805.390893] usb 6-1: new full-speed USB device number 2 using ohci-pci
[ 5805.633571] usb 6-1: New USB device found, idVendor=132b, idProduct=000b, bcdDevice= 1.00
[ 5805.633574] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5805.633576] usb 6-1: Product: DiMAGE Z10
[ 5805.633577] usb 6-1: Manufacturer: KONICA_MINOLTA
[ 5805.633578] usb 6-1: SerialNumber: 000058432214
[ 5805.675300] usb-storage 6-1:1.0: USB Mass Storage device detected
[ 5805.680518] scsi host6: usb-storage 6-1:1.0
[ 5805.680681] usbcore: registered new interface driver usb-storage
[ 5805.685765] usbcore: registered new interface driver uas
[ 5806.704644] scsi 6:0:0:0: Direct-Access KM DiMAGE Z10 1.00 PQ: 0 ANSI: 2
[ 5806.722600] sd 6:0:0:0: [sdd] 3897344 512-byte logical blocks: (2.00 GB/1.86 GiB)
[ 5806.728616] sd 6:0:0:0: [sdd] Write Protect is off
[ 5806.728619] sd 6:0:0:0: [sdd] Mode Sense: 18 00 00 08
[ 5806.734608] sd 6:0:0:0: [sdd] No Caching mode page found
[ 5806.734610] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 5806.776627] sdd: sdd1
[ 5806.814621] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 5947.620445] usb 6-1: USB disconnect, device number 2
